Category Archives: Solar

In a Green World, Distinguishing New Metal Roofs from Old is Hard

St. Catherine’s Church, in Reutlingen, Germany

By: Jane Martinsons, Metal Construction Association

We may know the start of 2014 down to the exact second, but the lines between old and new metal design and building materials will continue to blur well into the New Year and beyond. Here are two examples of how metal manufacturers are helping to redefine the true age of metal roofs in a green world.

First, let’s look to Europe where 100-year-old zinc roofs are commonplace, and in particular, at the recently renovated 120-year-old zinc roof on St. Catherine’s Church in Reutlingen, Germany. This roof restoration called for dismantling and removing all the zinc tiles from the roof in order to inspect, clean, and salvage as many as possible. Tiles that were too damaged for reuse were recycled, but inspectors found  the tiles that were not exposed to the main west-facing wind and weather were nearly all reusable. The remaining roof was re-clad with RHEINZINK  0.7mm square tiles, using 1,500 PrePATINA blue-grey 330mm x 330mm tiles.

Located at the old cemetery, the Gothic Revival-style church is now preserved to its original state, circa 1890. RHEINZINK says that with the service life of zinc products expected to last 80–100 years for roofs and 200–300 years for walls, the roof tiles will be around for New Year celebrations for generations.

“When our client said ‘give me a roof that I will never have to replace,’ we thought metal immediately,” said Nathan Kipnis, AIA.

Stateside, a new LEED Platinum home in Glencoe, IL, features an unusual look for a LEED home—traditional rather than modernist design, allowing the home to complement its neighborhood. The standing seam metal roof was a key element of the sustainable design. About 600 sq ft of 24-gauge PAC-CLAD  material from Petersen Aluminum, Elk Grove Village, IL was used. The Silver Metallic Kynar 500 coating offers high reflectivity and SRI (solar reflectance index) ratings and is Energy Star approved.

Private Residence, Glencoe, IL

The roof provides many green features. Its shape is asymmetrically arranged to collect as much storm water as possible. It is also sloped at two different angles—a summer and a winter angle. The steeper, south facing roof supports solar thermal panels, which are optimal for the low winter sun. The shallower south facing section of the roof includes solar PV panels, which maximize electrical production during hot summer days.

“When our client said ‘give me a roof that I will never have to replace,’ we thought metal immediately,” said Nathan Kipnis, AIA, principal of Kipnis Architecture and Planning, Evanston, IL. Meanwhile, general contractor, Scott Simpson, president of Scott Simpson Builders in Northbrook, IL, says that, beyond this project, he recently used an old metal barn roof on the interior walls of a renovated—and much beloved—bakery in Evanston.

“Cool” Roof Retrofit Earns Praise for Energy Efficiency

By: John Ryan, Metal Construction Association

Sometimes the word “cool” can be a bit overused–but not in the case of this recent metal roof retrofit project with the U.S. Air Force’s Goodfellow Air Force Base in Texas. This roof is cool–both literally and figuratively.

In 2010, a team of leading metal construction companies and the Metal Construction Association (MCA) were awarded a $1 million Environmental Security Technologies Certification Program (ESTCP) grant to develop a retrofit metal roof system with integrated renewable energy technologies, including an integrated assembly of six different roofing system components.

View the video above or read MCA’s case study to learn more about the project’s energy-efficient technologies, which include photovoltaics to generate electricity, solar-thermal technologies for domestic hot water and space heating, and rainwater capture for irrigation.after photo WEB

The Department of Energy’s Oakridge National Laboratory will soon be analyzing a full year’s worth of data on heat transfer, energy output from the photovoltaic panels and water usage from the building. MCA expects that the results will be positive, and the Air Force reports that preliminary numbers how a 44-percent reduction in energy consumption.

Stay tuned for the full report and results in the coming months from this “cool” project.

School Strives for Exellence in Classroom, and in Sustainability

Redding School of the Arts
Photo Courtesy of Steve Whittaker

The list of design accolades for the Redding School of the Arts in Redding, CA, is impressive. It is the first new school campus in the world to receive Platinum certification under the LEED for Schools 2009 standards, and it also is expected to achieve Net-Zero. The school is designed to achieve the Collaborative for High Performance Schools (CHPS) certification, a national movement to improve student performance and enhance the education experience by building the best possible schools.

Area View Of Redding School of the Arts
Photo Courtesy of Steve Whittaker

The design for the school was based on two essential ideas: First, the learning environment should create opportunities to show students, teachers and parents the importance of metal sustainability. Second, students should be inspired to learn in creative, colorful and fun surroundings. To help achieve these two ambitious functional and aesthetic goals, the design team turned to Metal Sales Manufacturing Corporation.

“We were looking for metal panels with recycled content, durability and an energy-friendly SRI (Solar Reflective Index) value,” says James Theimer, Principle of Trilogy Architecture who served as architect for the project. “Redding School of the Arts has been designed to last for 100 years. With the metal wall and roof panels, I think we found a product that would live up to that challenge.”

Photo Courtesy of Steve Whittaker
Photo Courtesy of Steve Whittaker

All of the metal panel colors used on the school are listed with ENERGY STAR®, improving energy-efficiency and reducing the amount of energy needed for cooling. The panels also have a long life cycle that will endure the wide temperature variations of the Sacramento Valley, are 100% recyclable, and contain a high percentage of recycled material – contributing to LEED points.

The use of metal wall and roof panels helps give the facility a smart and modern look worthy of its high-profile, high performance mission.

Kriner to Present at Energy Efficient Roofing Conference on April 8

Energy Roofing Conference LogoAttending the Energy Efficient Roofing Conference in Charlotte, NC, next week? Don’t miss Scott Kriner’s presentation on the integrated energy efficient metal roof retrofit system at Goodfellow Air Force Base, San Angelo, TX.

“This Department of Defense (DOD) demonstration project is a result of the $1 million Environmental Security Technology Certification Program grant, which was awarded to a team of industry professionals representing metal roofing, retrofitting, solar technologies, insulation, and the Metal Construction Association  (MCA),” said Kriner, MCA technical director. Results of the installation are expected later this year.

Kriner will be presenting on Monday, April 8, from 3:50–4:10 pm. At 4:30 pm he will serve as a panelist in a Q&A session.

Five of our Favorite Green Buildings for St. Patrick’s Day

The Bullitt Center
The Bullitt Center, Seattle

In honor of St. Patrick’s Day, the Metal Construction Association (MCA) has decided to celebrate our favorite metal green buildings; figuratively and literally. MCA—and its members—embrace the green construction movement, and support sustainable and energy-efficient products. Here is a list of some green projects we hope you will find interesting and inspiring.

The Bullitt Center, Seattle

Billed as the greenest, most energy efficient commercial building in the world, The Bullitt Center is a net zero energy building that is being constructed to meet the goals of the Living Building Challenge. Scheduled to open in 2013, the building features metal panels from Metal Sales Manufacturing Corporation that have a long life span, are 100% recyclable and contain a high percentage of recycled material.

Pixel Building with Green Roofing Aesthetics
Pixel Building, Australia

Pixel Building, Melbourne, Australia

Coined “the office of the future”, the Pixel Building is the first carbon neutral office building in Australia, and has received the highest Green Star rating ever awarded by the Green Building Council of Australia. With striking, multi-colored metal MCM panels from Alpolic on the exterior, the building is sure to grab the attention of passersby.

after photo WEB
GoodFellow Air Force Base, Texas

Goodfellow Air Force Base, San Angelo, TX

No, this Department of Defense facility is not olive drab, but the project earned a place on this list because its recent metal-roof retrofit includes integrated renewable energy technologies that will maximize electricity generation. The roof also has a rainwater capture system that will be used for irrigation purposes on the base.

MRI Scanner Unit
MRI Scanner Unit, UK

MRI Scanner Unit, Norwich, United Kingdom

The MRA Scanner Unit project features Insulated Metal Panels (IMPs) from Kingspan Benchmark in various shades of green. It’s on this list because we love the colors for St. Patrick’s Day, but it’s not just an attractive project. In fact, IMPs provide consistent insulation and thermal efficiency, often leading to increased energy efficiency.

empiregreen
Empire State Building, New York

Empire State Building, New York City

A true American icon, the Empire State Building is bathed in green lights for St. Patrick’s Day. In 2012 the building was outfitted with a new, energy-efficient LED lighting system that will make this year’s St. Patrick’s celebration even more green. Find out when you can view tower’s lights with their schedule.

MCA wishes you a very happy St. Patrick’s Day!

By: John Ryan, Metal Construction Association

Just to close the loop on our recent glut of posts about solar power and metal roofs, we are pleased to share a Solar Energy Industries Association (SEIA) report released today that states that 2012 was a record year for solar installation, as reported by CNN.

In 2012 more than 3.3 gigawatts of solar power were installed, which is enough to power about 500,000 homes. That is a 76% increase from 2011, and the industry expects another record year for solar power installations in 2013.

“There were 16 million solar panels installed in the U.S. last year – more than 2 panels per second of the work day – and every one of these panels was bolted down by a member of the U.S. workforce,” said Rhone Resch, president and CEO of SEIA. “We’ve brought more new solar online in 2012 than in the three prior years combined.”

See below for some fun facts about the Top 10 Solar States, and visit SEIA for an executive summary of the full report.

Related Posts:

Top 10 Solar States